THE PAINTBALL RACK are custom made paintball products produced by Molds-R-Russ and made in the U.S.A. All products are produced using aircraft grade aluminum, stainless steel hardware and U.V. rated rubber inlays. The Paintball Rack products are light weight (for travel and shipping) and made to last a long time. So take a look at what is available and see what the Paintball Rack has for you.

THE EXPANDABLE RACK is a custom built expandable maker storage system designed for the tournament paintball player. Each stand is designed to hold several markers at one time. The rubber used on the barrel holder and the tank holder is a U.V. rated o-ring material. The "Expandable Rack" can also be broken down into several small pieces in order to ship or fit into a bag for flight travel. THE ROLLING STAND wheels can be added to one or both legs.

THE PRE-FABRICATED RACK uses the same marker holding sections with a different connection tube welded to the main bar. Thus creating a one piece section. These stands have two lock down tabs welded to the main bar. This lets you run a cable through the triggers on your guns and lock them to the stand.  The other lock down can be used to lock your stand to something solid, so your stand and guns stay where you put them. These stands will only break into 3 pieces (one main bar and two sets of legs). THE ROLLING STAND wheels can be added to these stands too.

THE TABLE STAND uses both structures from the EXPANDABLE RACK and the PRE-FABRICATED RACK but, instead of legs they use an end bracket. This end bracket lets you set your stand on a table, truck bed or a hatchback and still reach your marker at a mid-section height (depending on how high or low your truck or hatchback is). This bracket puts the main bar about two inches off the surface you put it on.

All stands are light weight for example: a 4-man Expandable stand, the heaviest, ships at about 35lbs.

THE DISPLAY STAND

A single marker holder to hard mount a marker in a fixed position in order to display product for sale or to just show off a retired or collectible marker. Can be made in both WALL MOUNT (vertical mounting) and TABLE MOUNT (horizontal mounting). Gun mounting comes in three different styles. #1- Screw mount gun only. #2- Dove tail gun mount with dove tail asa adapter. #3- Screw mount gun with dove tail asa adapter (shown in picture below)

Wall Mount or Table mount $50

When ordering please specify type of gun mounting #1,#2 or #3 from above.

TABLE MOUNT

A single marker holder using the same marker holding system as the "EXPANDABLE RACK" with a bracket to affix (with screws) on a horizontal surface.

Single Marker Holder $125

THE ROLLING STAND

 Add a wheel to any stand with legs. Wheels can be added to either end or both ends.

1 Set of Wheels - $100

2 Sets of Wheels - $150

THE TABLE STAND

This stand uses both existing stand holders (Expandable and Pre-fabricated) with ends that allow you to place the stand on a table, truck bed, the back of a hatch back or wherever you decide to put it. The stands main bar sits about two inches off the ground.

 Pre-fabricated 9-man $1075

THE EXPANDABLE STAND

This is an expandable paintball marker storage system that consist of a set of legs and a Marker holder section. This stand can start at as little as a 2-marker rack and sections can be added at a later date to accommodate more markers. The top section is compatible with the table clamp and the wall mount. These stands now include a lock down tube (1) in order to run a cable lock through your guns trigger and lock down to the stand. Each rack is custom built to suite the owner specification (color 1 only) and amount of holders. please allow 2 to 3 weeks for delivery.

additional holders (per one holding section) $125

PRE-FABRICATED RACK

This is a pre-determined number of marker holder section welded to a 1 piece bar (minimum of 5 holder sections) these stands come with a lock down tab for securing your guns, stand or both. These are the same stands being used by the XPSL.

additional holders (per one holding section) $125

CLAMP STAND OR WALL-MOUNT

CLAMP STAND -This is a single marker holder using the same holding system as "THE EXPANDABLE RACK"  with a "C" clamp to a table, a counter or any thing the clamp will clamp to. The opening of the clamp is just over two inches.

WALL MOUNT - This is a single marker holder using the same holding system as "THE EXPANDABLE RACK"  with a back bracket to affix (with screws) to a vertical surface.